|
LX-02 照度轉換器
特色
0 ~ 2000 Lux (0.1mV=1Lux)
2000 ~ 20000 Lux (0.1mV=10Lux)
20000 ~ 50000 Lux (0.1mV=100Lux)
-
精確度 : ±5%
-
Size : 100 x 50 x 25mm
應用
- To cooperate with DMM be used as a precision Light ( LUX meter ) or to connect with analyzer, recorder, tape recorder, controller... .
規格
範圍 (Range)
- 3 ranges : Range 1, Range 2, Range 3
Range 1 - 0 to 2,000 Lux.
Range 2 - 2,000 to 20,000 Lux.
Range 3 - 20,000 to 50,000 Lux.
輸出 (Output)
- Range 1 - 0.1 mV per Lux.
Range 2 - 0.1 mV per 10 Lux.
Range 3 - 0.1 mV per 100 Lux.
精確度 (Accuracy)
- ± ( 5% + 0.2 mV ).
感應器 (Sensor)
- Exclusive photo diode & correction filter, spectrum meet C.I.E.
Sensor COS correction factor meet standard.
電源供應 (Power Supply)
- DC 9V battery, 006P, MN1604(PP3) or equivalent.
電源損耗 (Power Consumption)
- Approx. DC 6 mA.
低電壓 (Power Failure)
- Build in low battery indicator.
操作溫度 (Operating Temp.)
- 0 to 50℃ (32 to 122℉).
操作溼度 (Operating Humidity)
- Less than 80% RH.
體積 (Dimension)
- MMain instrument : 100 x 50 x 25 mm ( 3.9 x 1.9 x 1.0 inch ).
Sensor probe: 82 x 55 x 7 mm ( 3.2 x 2.2 x 0.3 inch ).
重量 (Weight)
- 150 g/0.33 LB (including battery).
附件 (Standard Accessories)
- Light Sensor....................................................... 1 PC.
Instruction Manual ............................................. 1 PC.
操作程序 (OPERATION PROCEDURES)
- * Connect the output plugs to the volts ( Hi ) & com ( Lo ) input terminals of external Voltmeter or Multimeter.
* Multimeter : Select the desired range of DC volt 200 mV range.
Note :
a. Do not use auto range MULTIMETER.
b. The input impedance of external MULTIMETER (voltmeter) should be 10 Meg ohm at least.
|
